home *** CD-ROM | disk | FTP | other *** search
- Path: news.uidaho.edu!usenet
- From: dickow@raven.csrv.uidaho.edu (dickow)
- Newsgroups: comp.sys.amiga.introduction
- Subject: Re: A2000 Upgrading
- Date: 8 Jan 1996 04:37:41 GMT
- Organization: University of Idaho, Moscow, Idaho
- Distribution: world
- Message-ID: <764.6580T1177T1475@raven.csrv.uidaho.edu>
- References: <4ck6fq$3qi@odo.PEAK.ORG> <4ckqn2$6e3@cbs.ksu.ksu.edu>
- NNTP-Posting-Host: xslip30.csrv.uidaho.edu
- Mime-Version: 1.0
- Content-Type: text/plain; charset=US-ASCII
- Content-Transfer-Encoding: 7bit
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
-
- >hendrixb@PEAK.ORG (Brian Hendrix) writes:
-
- >>Does anyone know if an A2000 board rev 4 can be upgraded to a Fat Agnus?
- >....
-
- >The rev4 board can be upgraded, but it is trickier. Later boards had a jumper
- >that had to be moved. On the rev 4 board you have to cut a trace. It isn't a
- >big job, but you have to be sure to cut the right one. I had to do a simillar
- >job on my 500 rev 5 when I installed a fat agnus.
-
- I upgraded my 4.3 2000 years ago with MegaChip2000. I did have to cut a trace,
- which I botched and had to take the unit in for repair. It seems I cut my
- trace a little too deeply...it's a multi-layer PCBoard. Be carefull.
-
- **************************************//*
- * Bob Dickow (dickow@uidaho.edu) \\// *
- *****************************************
-
-